Hi - I upgraded to Slingshot VDSL a couple of months ago but about once a day my internet light goes red and I need to reset the modem.It did it this again this afternoon and needed 4 resets to get a green internet light again. I checked the log and it has these weird 2013 dates either side of 16:28 and 17:11. Any idea what this is? Would this explain the drop-out?2016-05-24 16:27:14 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 34803 Kbps, downlink rate: 79585 Kbps2016-05-24 16:27:32 [5] syslog: Accessor:[CPE] Method:[INFORM] Para:[] Result:[0] CPE periodically inform to ACS!2016-05-24 16:28:29 [5] syslog: Accessor:[CPE] Method:[INFORM] Para:[] Result:[0] CPE periodically inform to ACS!2013-11-12 00:11:36 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 33565 Kbps, downlink rate: 79957 Kbps2013-11-12 00:11:34 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 33298 Kbps, downlink rate: 78963 Kbps2013-11-12 00:15:37 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 27148 Kbps, downlink rate: 81278 Kbps2013-11-12 00:17:02 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 31841 Kbps, downlink rate: 80624 Kbps2013-11-12 00:11:36 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 35142 Kbps, downlink rate: 79276 Kbps2013-11-12 00:11:35 [5] syslog: Accessor:[CPE] Method:[DSL] Para:[] Result:[] DSL link status: Up, uplink rate: 33230 Kbps, downlink rate: 79605 Kbps2013-11-12 00:12:09 [6] syslog: Accessor:[CPE] Method:[NotiInform] Para:[type=2] Result:[0] 2013-11-12 00:12:09 [5] syslog: Accessor:[CPE] Method:[PPPoE] Para:[User=X@slingshot.co.nz ip=X] Result:[0] Wan Link was Connected2013-11-12 00:12:09 [6] syslog: Accessor:[CPE] Method:[NotiInform] Para:[type=2] Result:[0] 2016-05-24 17:11:57 [6] syslog: Accessor:[ACS] Method:[GetNoti] Para:[] Result:[00000000] 2016-05-24 17:12:04 [5] syslog: Accessor:[CPE] Method:[INFORM] Para:[] Result:[0] CPE periodically inform to ACS!I use a separate router (Netgear Nighthawk R7000) so I have faster wifi, but I'm not sure how would be responsible.Any assistance would be greatly appreciated. Slingshot just tells me to do the standard isolation testing but(a) I don't have another VDSL modem, and(b) even if it did, I don't see how it would tell us anything if the internet is working at the time I do itRegards,Craig.
↧
