Slingshot - Setup Belkin N600 wireless router to Fibre ONT

Hi thereI tried to setup my Belkin N600 router with slingshot fibre but had no luck.I came across this post from Captain Awesome CamH. But I cannot see any 802.11p or 802.11Q Vlan ID settings. Can someone point me to the right direction. Thanks

If you have your Slingshot username and password, try the following. I believe these are correct, but I'm doing this off the top of my head so it *may* not be 100% what's displayed. I also don't work for Slingshot, however I have set a few of these connections up before.

Plug the cable from your ONT into the WAN port on your N4FV

Under Advanced Setup, click WAN interface

Delete any existing WAN interface

Add a new WAN interface using WAN / GE1 interface (I'm not sure of the exact name)

On the next page, select PPP over Ethernet (PPPoE)

Under 802.11p Priority, empty the box

Under 802.11Q VLAN ID, enter 10

On the next page, enter your PPP username and password you've received from Slingshot

Click next if any additional pages are presented

This should be it - Let me know if you have any questions I may be able to assist with.